Eclipse - Fujitsu Ten AVX5000 - Manual (Page 185)

184
Adjusting sound quality
How to operate the optional 5.1ch decoder & AV selector unit
Setting the balance
The left/right/front/rear balance can be adjusted so that sound from all speakers arrives at the
listener's ears at the same time.
Touch in the POSITION
setting screen to display the
volume balance adjustment
screen.
Touch , , or .
● The adjustment level can be set to one
of 15 levels between F (front) and R
(rear).
● The adjustment level can be set to one
of 15 levels between L (left) and R
(right).
● Touch to set the volume
balance to the center position.
● Touch after making settings.
The set volume balance will be saved
and the system will return to the
previous operation screen.
● To set the position again, touch
and repeat the steps above.
FAD/BAL
CENTER
BACK
POS
●If the balance has been set (to a setting other CENTER), the positioning selector
setting will be cancelled (previous page).
●Touch and hold , , or while making fine adjustments to adjust
values continuously. Adjustment will lock when it reaches the center value, and
, , or must be touched again to continue adjustment.