Eclipse - Fujitsu Ten AVX5000 - Manual (Page 205)

204
How to use the HD radio
How to operate the optional HD radio tuner (U.S.A. only)
Saving radio stations
There are two modes for saving radio stations, manual and ASM. These modes operate
independently.
Use manual tuning or automatic tuning to select the station to be saved.
Choose a preset switch and press and hold it until you hear a beep.
● The radio station (frequency) is set. Touch the preset switch to tune in the selected
station.
Touch .
Press and hold until you hear 2 beeps in succession.
● The ASM function will activate and start automatically selecting stations. You will hear
a beep when the automatic selection of stations is completed. Touch again to
switch the display back to the broadcast stations originally saved.
Use manual tuning or automatic tuning to select the station to be saved.
Press and hold the preferred preset switch until you hear a beep.
Saving manually
Saving with ASM
FUNC
ASM
ASM
Changing stations saved by ASM
●ASM may not automatically receive stations if radio waves in the surrounding
area are weak.
●A frequency saved with the tuning switch may not match the frequency saved
with ASM even though the signal is received from the same station.
●Due to conditions for receiving radio waves, saved stations may differ even when
the ASM switch is operated repeatedly in the same location.
●Up to six stations with good signal reception are automatically saved in order of
frequency (low to high).
●When less than six stations capable of reception are found, nothing is saved for
the remaining preset switches.