Eclipse - Fujitsu Ten AVX5000 User Manual
Page 218
217
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
Because the AUTO.P function can be used to temporarily save channels for the
preset switches, channels saved manually will remain in memory even if AUTO.P is
used. Manually saving channels that are used regularly allows them to be restored
even after AUTO.P has been used, such as after traveling.
Touching
while AUTO.P is operating or after it has been used will return
the preset memories to their previous settings. (The channel saved with AUTO.P will
be deleted.)
Manual
AUTO.P
(Search started)
AUTO.P
(Search
completed)
AUTO.P
Automatically saving
channels to preset switches
Press and hold
until you
hear 2 beep in succession.
AUTO.P
About AUTO.P
●AUTO.P may not automatically receive channels if TV waves in the surrounding
area are weak.
●A channel saved with the tuning switch may not match the channel saved with
AUTO.P even though the signal is received from the same station.
●Due to conditions for receiving TV waves, saved channel may differ even when
the AUTO.P switch is operated repeatedly in the same location.
●Up to eight channels with good signal reception are automatically saved in order
of channel (low to high).
●When less than eight channels capable of reception are found, nothing is saved
for the remaining preset switches.