Eclipse - Fujitsu Ten AVX5000 - Manual (Page 251)

250
Mounting instruction
Mounting instruction
Mount the stud bolt to the main unit.
Insert the main unit into the mounting sleeve until it locks in place.
Install the bezel on the main unit.
-If installing the main unit using the side brackets of the vehicle-
Remove the pockets and any other accessories from the center cluster to
make room for the main unit.
Remove the mounting side brackets for the pocket.
●Note ●
Connect all cables before installing the main unit.
BEZEL 4
MOUNTING SLEEVE 2
BUSHING
METAL OF
VEHICLE
DASH BOARD
OR CONSOLE BOX
5
CENTER CLUSTER
POCKET
SCREWS