Eclipse - Fujitsu Ten AVX5000 - Manual (Page 159)

158
ESN security operating procedure
ESN security operating procedure
Canceling the security function using a “Memory Stick Duo”
Press for less than 1 second.
Touch .
● The security setting screen will appear.
Touch .
● The security code entry screen will
appear.
Press .
Insert the “Memory Stick Duo”.
● The recorded data will be read from the “Memory Stick Duo”.
If the contents recorded in the “Memory Stick Duo” match the information
recorded by the unit, “The security lock was unlocked.” will appear on the
display.
● The security function will be canceled and the deck will return to normal operation.
Eject the “Memory Stick Duo”.
● Refer to “How to eject disc (CD/DVD) or “Memory Stick Duo”” on page 48.
FUNC
SEC
CANCEL
FUNC
●If the security code that is entered does not match the code that is recorded by
the unit, “ERROR” will appear on the display for 2 seconds and operation will
continue as normal without the security function being canceled.
●If a “Memory Stick” has already been inserted, a “MS EJECT” message appears.
In this case, eject the “Memory Stick Duo” and insert it again. (Refer to “How to
eject disc (CD/DVD) or “Memory Stick Duo”” on page 48 for details on ejection of
the “Memory Stick Duo”.)
●If a reading error occurs or if an incorrect “Memory Stick Duo” is inserted,
“ERROR” will appear on the display for 2 seconds, and then the display will
change to “EJECT”. If this happens, eject the “Memory Stick Duo” and try again.
●Security setting cannot be canceled by this procedure if the “Memory Stick Duo”
containing the security code is formatted.