Eclipse - Fujitsu Ten AVX5000 - Manual (Page 229)

228
Important Points
For reference
Before asking for repairs
Slight differences in operation can sometimes be mistaken for malfunctions, so check the
following table before requesting any repairs.
If the following fail to solve the problem, contact your local retailer.
Symptom Possible reason Corrective action
The screen is dark for a brief period
when the power is turned on at low
temperatures.
This is a characteristic of LCDs.
This is not a malfunction. Wait for a
brief period.
The display is distorted for a brief
period after the power is turned on. This is a characteristic of LCD
backlighting.
This is not a malfunction. The
display will stabilize after a brief
period.
No sound comes out. Volume is poorly adjusted.
Press the volume switch and check
volume.
Sound comes out of only one side
(left or right, front or back).
A speaker wire is disconnected.
Check the connections of the
speaker wires.
Volume is poorly adjusted.
Check the left/right volume
adjustments.
Sound quality does not change
even after making adjustments.
The adjusted audio quality is not
included in the radio broadcast or
disc.
Check by changing the radio
station or disc.
A CD/DVD will not go into the deck.
Power is not turned on.
Turn the vehicle’s ignition switch to
[ACC] or [ON].
A disc is already inserted and you
are trying to insert a second disc.
Eject the previously inserted CD/
DVD and insert the preferred CD/
DVD.
A CD/DVD cannot be played.
There is water condensation in the
deck.
Do not use the deck for a while and
then try using it again. (See page
31)
There is a large scratch or warp in
the CD/DVD.
Insert a different CD/DVD.
The CD/DVD is very dirty.
Clean the CD/DVD.
(See page 32)
The CD/DVD is upside down.
Insert the CD/DVD the correct way.
(See page 32)
The inserted CD/DVD type is not
supported. Insert a CD/DVD that is supported
by the unit. (See page 31, page 32)
not displayed on the
screen.
The CD changer is not completely
connected. Check the connections to the CD
changer.
Audio is outputted, but not TV or
DVD video. (With vehicle stopped.)
The parking brake has not be set. Set the parking brake.
Neither video nor audio is output.
The vehicle ignition switch has not
been turned on. Turn the vehicle ignition switch to
[ACC] or [ON].
The connection wires/cables is not
completely connected.
Check all connections.
TV image nor audio is outputted. VTR mode is activated. Touch and select the
channel.
CDCH
TV