Eclipse - Fujitsu Ten AVX5000 - Manual (Page 66)

65
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
Touch .
● Each time this switch is touched, the
slope will be changed in the following
order shown below.
● Touch after making changes.
The crossover setting will be saved
and system will return to the previous
operation screen.
The output level of the woofer can be adjusted.
Touch the or .
● The adjustment level has 6 “+” steps
and 6 “-” steps.
: Increase level.
: Decrease level.
● Touch after making changes.
The woofer output level adjustment will
be saved and system will return to the
previous operation screen.
SLOPE
PASS 6 dB/oct 12 dB/oct
24 dB/oct 18 dB/oct
BACK
If no woofer has been connected, set the slope adjustment to “PASS”. (If slope is
set to a setting other than PASS, the low frequency range will not be outptted from
the speakers.)
Woofer output level adjustment
BACK