Eclipse - Fujitsu Ten AVX5000 - Manual (Page 99)

98
How to use the MP3/WMA player
How to operate the MP3/WMA player
About MP3/WMAs
MP3 (MPEG Audio Layer III) is a standard format for audio compression technology. By using
MP3 a file can be compressed to one-tenth the size of the original.
WMA (Windows Media
TM
Audio) is format for audio compression technology. WMA files can
be compressed to a size smaller than MP3 files. This unit has limitations on MP3/WMA file
standards and recorded media and formats that can be used.
● Supported standards : MPEG1 Audio Layer III
● Supported sampling frequencies: 44.1, 48 (kHz)
● Supported bit rates : 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps)
* Supports VBR.
* Does not support free format.
* Bit rates vary for MPEG-1 and MPEG-2.
● Supported channel modes : stereo
● Supported standards: WMA Ver. 7
WMA Ver. 8
WMA Ver. 9
● Supported sampling frequencies: 32, 44.1, 48 (kHz)
● Supported bit rate: 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)
* Supports VBR (48~192 kbps).
* Does not support lossless compression.
* Does not support WMA files recorded at a frequency of 48 kHz with a bit
rate of 48 kbps.
Playable MP3 file standards
Playable WMA file standards
Use 128 kbps or lower for the MP3 bit rate. If the bit rate exceeds 128 kbps, there
may be a skipping type effect during MP3 playback.