Eclipse - Fujitsu Ten AVX5000 - Manual (Page 44)

43
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
Switching the display’s pull-out positions
With the display open, press
for less than 1
second.
● The display setting screen will appear.
Touch .
● Each time the switch is touched, the
display pull out positions will be
changed in the following order shown
below.
When adjustment is complete,
press
.
OPEN·TILT
button
OPEN·TILT
POSITION
Rear position (toward the dashboad)
*Front position (toward the viewer)
*: The front position cannot be adjusted
when the screen is in the 6th or 7th
tilt position.
OPEN·TILT
button
OPEN·TILT
Do not attempt to manually adjust the pull-out display. Applying excessive force to
the display could damage it.
The pull-out position of the display will be saved once it has been adjusted. The
display will then automatically return to this position when it is reopened.