Adjusting sound quality – Eclipse - Fujitsu Ten AVX5000 User Manual
Page 183
182
Adjusting sound quality
How to operate the optional 5.1ch decoder & AV selector unit
● Touch
to cancel measurement.
To write measurement results to a “Memory Stick Duo”
Insert the “Memory Stick Duo”.
Press and hold the
switch until you hear a beep.
● After touching the switch, a 10-second
count down begins. Leave the vehicle
during that time.
● Pink noise will be outputted from the
speakers and measurement of the
frequency characteristics will start.
● When measurement is complete, the
measurement results of the front
channel will appear on the display.
● Measurements can be written to a
“Memory Stick Duo” and corrected
automatically using E-iSERV web site.
● Touch
to
cancel
measurement.
STOP
Measure
STOP
Slight errors may occur in the measurement data under some circumstances when
this function is used. In addition, it is not equivalent to the precise measurements
that can be made by professional measuring devices.
●Close all doors and windows while measurement is in progress.
●Sound quality data is written to “Memory Stick Duo” as follows.
●The folders and files that are required for E-iSERV sound effect customizations
are created automatically when the data is written to the “Memory Stick Duo”.
●Select a file in
when uploading sound quality data to the E-iSERV
(web site).
MSFTEN
SOUND
Adjustment mode
105*000.ftn
Three digit number
File extension
MSFTEN
SOUND