Eclipse - Fujitsu Ten AVX5000 - Manual (Page 254)

253
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
XX
No. Name Wire color Destination
1 B+ Yellow
Connect where the power is constantly available,
regardless of the ignition switch's position.
2 ACC Red
Connect where the power comes on when the ignition is
in the ACC position.
3 Illumination power supply Orange/white
Connect to where power comes on when the vehicle
light switch is turned on.
4 Antenna power supply Blue
Connect to the automatic antenna control terminal of the
vehicle.
5 External amp turn on Blue/white
Connect to the control terminal for the external amp turn
on.
6
Speaker output leads
(Front)
Connect to the front speakers.
White: Left +, White/Black: Left -
Gray: Right +, Gray/Black: Right -
7
Speaker output leads
(Rear)
Connect to the rear speakers.
Green: Left +, Green/Black: Left -
Purple: Right +, Purple/Black: Right -
8 Ground Black Connect where good body grounding is available.
9 E-LAN terminal (13P) Connect to the E-LAN terminal of the CD changer, etc.
10 Front line-out terminals Connect to the RCA connector of an external amplifier.
11 Rear line-out terminals Connect to the RCA connector of an external amplifier.
12
Line-out terminals
(Non-fader) Connect to the RCA input connectors of a EQ, or the
RCA input connectors of a woofer amplifier.
13 GPS antenna terminal (8P) Connect to the GPS unit.
14 Radio antenna receptacle Connect to the radio antenna of the vehicle.
15
Back-eye camera external input
terminal (4P) Connect when using a back-eye camera (sold
separately) with the system.
16 VTR input terminals
Connect to the output cable of external video equipment
such as a VTR.
Yellow: Video signal, White: Audio (left) signal
Red: Audio (right) signal
17 VTR output terminals
Connect to the monitor with video input.
Yellow: Video signal, White: Audio (left) signal
Red: Audio (right) signal
18 Digital output terminal
Connect to the digital input connectors of an auxiliary
unit.
19 Parking brake signal Red/white Connect to the parking brake signal terminal.
20 Reverse signal Green
Connect the reverse signal output of the vehicle to this
terminal when connecting a back-eye camera.
21 DVD-MUTE output Blue Connect to the DVD-MUTE input terminal.
22 Steering remote control terminal
Connect to the vehicle steering remote control.
* Compatible vehicle models for installation :
Vehicle with voltage detection-type steering
remote control. Ask your dealer for details.