Eclipse - Fujitsu Ten AVX5000 - Manual (Page 39)

38
Name of controls and parts
Introduction
Touch switches
Unit can be operated by touching switches on the screen.
[About the operation of touch switch]
● Touch the switches until you hear a beep.
● Touch the switches lightly to prevent damage to the screen.
● If a switch does not respond, remove your finger and touch it again.
● Unavailable switches are shaded.
● When a function for a switch is active, the color of that switch will change.
Touch these switches with your fingers.
Using a pen, pencil or object with a hard or sharp tip to touch the screen may
cause damage to the unit.