Extron electronic MEDIALINK MLC 52 - Manual (Page 107)

5-47 MLC 52 Series MediaLink Controllers • Serial Communication
Initial configuration options screen
Resetting
Using the configuration software, you can reset the MLC 52 to its factory
defaults — the original values and settings with which the MLC was delivered.
(See “Factory defaults” on page 5-37.)
The Total Factory Reset option is not available in emulation mode.
To reset to factory defaults,
1 . From the File menu, select Total Factory Reset.
File menu, Total Factory Reset selected
2 . The following confirmation prompt appears, asking if you want to save
your current configuration before uploading the firmware.
Reset to factory defaults confirmation prompt