Extron electronic MEDIALINK MLC 52 User Manual
Page 87
5-27
MLC 52 Series MediaLink Controllers • Serial Communication
Change IR Driver Location
— Lets you select a folder where the MLC
will look for the IR drivers that you are loading. (See “Changing the
location of the IR Drivers” on page 5-8 for more information.)
Show Trace Window
— Opens the Trace Window, in which you can
view a record of all commands that are submitted via the front panel,
SIS, or the Windows-based configuration software, as well as the
MLC’s responses to the commands.
Trace Window example
As you select an option or enter a command, the system’s
acknowledgement of the input is displayed immediately on the Trace
Window. You can scroll through this screen to locate any command
that was entered since the last reset or data clearing. You can use this
information for troubleshooting purposes.
•
Help menu
Contents
— Displays the MLC 52 help file, in which you can look up
all procedures for configuring the MLC. (You can also display the help
by pressing the F1 key on your computer keyboard.)