Extron electronic MEDIALINK MLC 52 User Manual
Page 85
5-25
MLC 52 Series MediaLink Controllers • Serial Communication
Load configuration from... window
3
.
If necessary, browse to locate the configuration file that you want to restore.
(Configuration files are by default stored in the folder at c: \Program Files\
Extron\MediaLink
.)
4
.
Select the desired configuration file. It must have the extension .mlk.
5
.
Click Open. After a few seconds, the selected configuration is uploaded to
the MLC 52.
Overview of the MLC 52 configuration program main screen
The MLC 52 Configuration Program main screen is the interface from which you
configure the controller and IR 452 buttons, and initiate IR learning through
software. It lets you perform functions such as picking and assigning IR or
RS-232 driver functions to buttons, removing programming from buttons, and
selecting a switch mode to group buttons to operate in a mutually exclusive
operation. The screen contains graphical representations of the MLC 52 and the
IR 452 remote control. Click on a button representation in these diagrams to
select a button for programming, then make selections for the button in the other
fields on the screen.
In the example below, the standard (one-gang sized) MLC is shown.
However, the buttons on MLC 52 VC model (with the volume control knob)
are configured by the same methods.