Extron electronic MEDIALINK MLC 52 User Manual
Page 81
5-21
MLC 52 Series MediaLink Controllers • Serial Communication
If you want to create a configuration for an MLC that is not connected to
your computer, select the Emulation Mode tab and see “Using emulation
mode” on page 5-43.
3
.
From the “Select a COM port” drop box, select the port through which your
computer will communicate with the MLC (information on the
communications port to use should be available from your system
administrator).
Mode selection window, Select a Comm Port tab
4
.
Click OK. The following screen appears:
Model selection screen
5
.
Click on the graphic representation of the connected MLC 52 model
(standard or VC). (When you subsequently open the MLC 52 configuration
program, the software detects and displays the model that you originally
specified, and you do not see this screen again.)