Extron electronic MEDIALINK MLC 52 - Manual (Page 79)

5-19 MLC 52 Series MediaLink Controllers • Serial Communication
Wizard Finish screen
10 . On the Finish screen, select either of the radio buttons, then click Finish.
• The first radio button closes the wizard and opens the Windows-
based configuration program, enabling you to view and/or edit the
configuration you most recently uploaded.
When you click Finish with this option selected, a prompt appears,
reminding you to save the configuration after editing it using the
Windows-based configuration software. Click OK to close the prompt.
After a few seconds, the Windows-based configuration software main
screen opens, displaying your most recently uploaded configuration.
(See “Configuring using the Windows-based configuration program,”
in the next section, for instructions on editing a configuration.)
• The second radio button closes the wizard without opening the
configuration software.
Configuring using the Windows-based configuration program
To configure the MLC 52 more extensively than the Configuration Wizard
permits (for example, to add IR drivers to an MLC 52 RS, or to change button
labels), you can work directly from the Windows-based configuration software
main screen.
This screen is also your starting point for performing advanced configuration
procedures that also are not available through the wizard (for example,
configuring buttons on the optional IR 452 remote control to enable the IR 452 to
control a VCR, DVD player, or other display device via the MLC and the IR Link
or IRL 20. See “Programming the MLC 52 for control by the IR 452 Remote,” later
in this chapter).
Using the software, you can create a completely new configuration, or modify an
existing configuration and save it under a new name.