Extron electronic MEDIALINK MLC 52 - Manual (Page 116)

MLC 52 Series MediaLink Controllers • Specifications, Part Numbers, and Accessories A-2
Specifications, Part Numbers, and Accessories
Specifications
Control/remote — MLC controller host ports
Serial control port ........................ 1 front panel 2.5 mm mini stereo jack (tip-ring-sleeve)
Baud rate and protocol ............... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations Mini stereo jack: tip = TX, ring = RX, sleeve = GND
Program control .......................... Extron’s configuration program for Windows
®
Extron’s Simple Instruction Set (SIS ™ )
Control — projector/plasma (MLC 52 RS, MLC 52 RS VC)
Projector control port ................. (1) 3.5 mm direct insertion captive screw connector, 6 pole for IR and 1-way
RS-232 control (connector is shared between power input and IR and 1-way
RS-232 projector control)
IR control ...................................... TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
RS-232 control (1-way) ................ ±5 V
Baud rate and protocol (RS-232) 57600 to 1200 (9600 default) baud (configurable); 8 (default) or 7 data bits; 1
stop bit (±5 V); no parity (default), or even or odd parity
IR learning frequencies ............... 30 kHz to 62 kHz
IR learning distance ..................... 4" (10 cm) to 14" (36 cm) from the side panel
Control — projector/plasma (MLC 52 IR, MLC 52 IR VC)
Projector control port ................. (1) 3.5 mm direct insertion captive screw connector,
6 pole for IR (connector is shared with power input)
IR control ...................................... TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
IR learning frequencies ............... 30 kHz to 62 kHz
IR learning distance ..................... 4" (10 cm) to 14" (36 cm) from the side panel
Control — peripheral equipment (MLC 52 RS VC, MLC 52 IR VC)
Control port (for 10k ohms control)
(1) 3.5 mm direct insertion captive screw connector, 3 pole
Pin configuration ......................... 1 = reference voltage input, 2 = variable voltage output, 3 = GND
General
External power supply ................ 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A,
regulated
Power input requirements ......... 12 VDC, 0.15 A
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount .................................. Yes, with optional faceplate #70-554-02 or 70-554-03.
Also wall- and furniture-mountable.
Enclosure type .............................. High-impact plastic
Enclosure dimensions
MLC 52 RS, MLC 52 IR
Faceplate ................... 4.5" H x 2.78" W x 0.13" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang)
Device ........................ 2.5" H x 1.6" W x 1.5" D (6.4 cm H x 4.1 cm W x 3.8 cm D)
(Depth excludes connectors and buttons.)
MLC 52 RS VC, MLC 52 IR VC
Faceplate ................... 4.5" H x 4.6" W x 0.13" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang)
Device ........................ 1.4" H x 1.3" W x 0.9" D (3.5 cm H x 3.3 cm W x 2.3 cm D)
and 2.5" H x 1.6" W x 1.5" D (6.4 cm H x 4.1 cm W x 3.8 cm D)
(Depth excludes knob, connectors, and buttons. Allow at least 2" (5 cm)
depth in the wall or furniture for device and cable clearance.)