Mounting the mlc to a wall or furniture, Extron wall mounting bracket mlc 52 – Extron electronic MEDIALINK MLC 52 User Manual
Page 27
2-17
MLC 52 Series MediaLink Controllers • Installation
Wall
MLC 52
DI
SPLA
Y
OFF
ON
VIDEO
VO
L
VO
L
PC
Extron
Wall Mounting Bracket
MLC 52
Mounting the MLC 52 to a mounting bracket (mud ring)
Mounting the MLC to a wall or furniture
1.
With all cables attached to the MLC and power disconnected at the source,
insert the MLC into the wall or furniture.
2.
Fasten the MLC and faceplate directly to the furniture or wall using wood
screws.
If the MLC (and the IR Link, if applicable) is not mounted to a grounded metal
wall box,
• Ground each faceplate directly to an earth ground, or
•
Tie each faceplate to its circuit board and power supply via a ground pin on
one of the connectors.
Do not tie a product’s faceplate to both a separate earth ground and the circuit
ground (via a connector pin). If you tie a product to two different ground
sources, you may introduce ground loops or other grounding-related problems
into the system.