Extron electronic MEDIALINK MLC 52 - Manual (Page 110)

Serial Communication, cont’d
MLC 52 Series MediaLink Controllers • Serial Communication 5-50
4 . Locate and select the new firmware file. Firmware files are extracted to the
following location: c:\Program Files\Extron\Firmware\MLC 52\
MLC_52_19_1691_50_vx_xx.s19
, where vx_xx is the firmware version
number.
Firmware update files have a .s19 extension; make sure that the “Files of
type“ field is set to *.s19.
Selecting the firmware on the Choose Firmware File window
5 . Click Open. The path to the firmware file is displayed in the Select a
Firmware File field on the Firmware Loader window.
6 . On the Firmware Loader window, click Upload. The firmware update file is
uploaded to your MLC. During the process, the Firmware Loader window
indicates the progress of the upload.
When the upload is complete, the message “Transfer Complete!” appears in
blue on the Firmware Loader window.
Firmware Loader window
7 . Click Exit to close the window. When you reopen the configuration
program, the new firmware version is in effect.