Oki MC363dn User Manual

Page 123

Advertising
background image

7. Registering and Managing Devices

- 123 -

4

Configure the settings of the device.

[Record Job Log to Device]

Check this and click [Apply] for the device to start
recording the log. Remove the check and click
[Apply] for the device to stop recording the log.

[Job Log Acquisition Schedule

Settings]

Set the schedule by which the job log is
acquired. This is enabled when [Record Job
Log to Device] is checked.

[Specify Time]

Acquired for each set interval. The maximum
interval time that can be set is 24 hours. The
default setting is set as an optimized value
detected from the state of the added device. If
the interval is set to a time that is longer than
the default settings, some of the job logs may
not be acquired.

[Time specified]

Set the specific time. Click [Specify Time] and
add the time. Up to 24 acquisition times can be
added. After adding, click [OK].

Note

Always set a time when the computer
where the sPSV is set up and device are
both switched ON.
The job log is not acquired if the power is
not ON.
If the device is printing or an error is
occurring, the job log is not acquired.

5

Click [Apply].

When the “Enter an administrator
password for the device” window is
displayed, open the [Device Info] input
window, enter the administrator password
for the device and click [Apply].

Note

• Depending on the device, this may not

be displayed.

• For details on the device’s factory set

administrator password, see the User's

Manual of the device.

• If the device server ID is already set

from a different server, a confirmation

dialog box is displayed.

• To change the setting, enter the Server

ID.

6

Click [OK] in the confirmation window.

Set Access Controls

Check this check box when you want to activate
access control for multifunction printers that have
an access control function on the control panel.

Note

Users cannot be registered when the
access control is disabled.

1

Set the job log acquisition information
in [Function Details] > [Manage] >
[Device Management Settings] > [Device
Settings].

Advertising