Adding manually, Adding unregistered item settings, Setting use restrictions targeted to the – Oki MC363dn User Manual
Page 161: Application name
9. Restricting Device Use
- 161 -
3
Select [OtherHostNames] from [Registered
Host Name List].
4
Configure the settings in [Restricted Items
List].
For details on restriction items, see “Usage
Limitations” (P. 143).
5
Click [OK].
6
Refer to “Adding from the Job Log”
(P. 158) steps
11
and
12
to register the
device.
Setting Use Restrictions
Targeted to the Application
Name
If required, use restrictions can be set to
the application name. Add the settings
using one of the following methods.
• Adding manually
• Adding from the job log
Adding Manually
1
Configure from [Details Screen] >
[Manage] > [Device Management
Settings] > [Device Settings].
2
Select the device to configure from
[Device].
3
Click in [Log/Access Control] to open
the settings window.
4
Check [Enable access control.], and set
[Panel Access Control] and [User Auth.
Method:].
Note
• Depending on the device, some items
may not be displayed.
• Depending on the used application, a
space may be included in the application
name. When the application name is
specified using [Direct Input] and the
restrictions are not enabled, select and
register the application name that you
want to restrict in [Job Log].