Oki MC363dn - Manual (Page 57)

- 57 -
5. smart PrintSuperVision (sPSV)
No. Item Details
(2) Step 2: User
Registration* If the user for which you want to check the usage history
is not registered, register the user. Once registration is
complete, future registration is not needed. Once the device
is registered there is no need to perform registration again.
(However, user registration is required when adding a new
user.)
To browse the device usage status in user group units, click
[Add a Local User Group] to create a group.
For details, see Details Screen > Options Tab > User
Settings (P. 93).
Memo
If the setting area is not displayed, click to open the
setting area.
(3) Step 3: Add User/Acquire
Print Log* Configure the settings so that the print log can be received
by the registered device, and register the user. Once the
device is registered there is no need to perform registration
again. (However, device registration is required when
adding a new device.)
For details, see Details Screen > Management Tab > Device
Management Settings > Device Settings > Log/Access
Control (P. 85).
Memo
If the setting area is not displayed, click to open the
setting area.
(4) Step 4: List view of
device usage history Display the device usage history for each user.
For details, see Details Screen > Report Tab > Display
Report > Job Information (P. 90).
Memo
The job log is not reflected immediately after registering/
adding the device and user. After a registered user has used
the device, the job log is acquired and displayed.
*Log in to sPSV as an administrator to configure these settings.