Oki MC363dn - Manual (Page 36)

- 36 -
2. Setting Up smart PrintSuperVision (sPSV)
2. Setting Up smart PrintSuperVision (sPSV)
This section explains how to set up sPSV.
Note
The window and setting contents differ depending on the device model.
Operating Environments
● Windows 10
● Windows 8.1
● Windows 8
● Windows 7
● Windows Vista
● Windows Server 2012 R2
● Windows Server 2012
● Windows Server 2008 R2
● Windows Server 2008
Memo
This includes the 64-bit version of Windows
10, Windows 8.1, Windows 8, Windows 7,
Windows Vista, Windows Server 2008 and
Windows Server 2008 R2.
Recommended Computer
Specs
● CPU: 1 GHz or higher
● Memory: 512 MB or higher
● Hard disk space: 30 MB or more
Note
• The computer on which sPSV is set up
needs to remain switched on, or needs to
be running at the time when the job log
is set to be obtained from the device.
• The above hard disk space is the
minimum space required during
installation. At least 30 MB of disk space
is required to save job logs, etc. when
using sPSV.
• Approximately 3 MB of hard disk space is
required to save 10,000 job log entries
on the computer.
Standard Ports
sPSV uses the following ports for
communication.
● HTTP (TCP 50081)*
● Port 9100 (TCP Port 9100)
● SNMPv1 (UDP Port 161)
● SNMPv1 Trap (UDP Port 162)
● LDAP (TCP Port 389)
● SMTP(S) (TCP Port 25/587)
● SQL Server (TCP port 1433)
*If the default port number is set
Note
The firewalls of the server computers and
client computers need to be set to allow
access to these ports.
Supported Browsers
● Microsoft Internet Explorer Ver 8.0
/9.0/10.0/11.0
Other
● Microsoft .NET Framework 4.0/4.5
Full Package
● Internet Information Service (IIS)
7.0/8.0
(if IIS is used as the web service)
● Microsoft SQL Server
2005/2008/2012
(if using SQL Server as the
database)
● Microsoft SQL Server Compact
(if [Use database prepared during
setup] is selected in sPSV)
Note
See the online help for more information
on sPSV.