Oki MC363dn - Manual (Page 220)

14. Other Functions
- 220 -
Automatically
Reconnecting When the
Device IP Address Is
Changed
When the device IP address is changed,
the new IP address can be automatically
connected, and the log can still be
acquired. This is effective when the
IP address is dynamically assigned in
the DHCP environment, or when the
administrator changes the IP address.
1 Specify the interval at which to check
for changes to the device IP address
from [Details Screen] > [Option] >
[Environment Settings] > [Communication
Settings].
2 Click in [Communication Interval]
to open the [Communication Interval]
settings window.
3 Check [Confirm changes to the IP address]
and enter the interval at which to confirm
the IP address.
4 Click [Apply].
4 To change the connection destination,
select the connection destination from the
list and click [OK].
To change the IP address, enter a new IP
address, and click [OK].
5 Click [Apply].
When the “Enter an administrator
password for the device” window is
displayed, enter the administrator
password for the device and click [OK].
Note
• Depending on the device, this may not
be displayed.
• For details on the device’s factory set
administrator password, see the User's
Manual of the device.
6 Click [OK] in the confirmation window.