Oki MC363dn - Manual (Page 21)

- 21 -
1. Introduction
When you want to set usable volumes and summarize job logs for each department
but also set individual usable volumes for some users within the department and
summarize the corresponding job logs.
sPSV administrator
UsersGroup 1
UsersGroup 2
Set usable volume for each user but
set separate volumes for some users
Job log
(summarize for each
user group but
separately for some users)
Configuring the settings in sPSV
Configuring the settings in the
client software
(1) Create a user group for each department and register the
users in sPSV. ⇒ P. 130
Do not check “Include in usable volume summarization for user
group” for some users. ⇒ P. 170
(2) Set usable volumes for each user group and set of specific
users registered to the device(s). ⇒ P. 147
(3) Set the printing policy as “Identify users by PIN” and register
this setting to the device. ⇒ P. 149
(4) Configure the settings for acquiring job logs from the
device(s). ⇒ P. 192
(5) Configure the settings so that job logs are summarized for
each user and for each user group. ⇒ P. 200
Set the user IDs (PINs) of the users.
⇒ P. 107
(1) Create a user group for each department and register the
users in sPSV. ⇒ P. 130
Do not check “Include in usable volume summarization for user
group” for some users. ⇒ P. 170
(2) Set usable volumes for each user group and set of specific
users registered to the device(s). ⇒ P. 147
(3) Set the printing policy as “Identify users by user name” and
register this setting to the device. ⇒ P. 149
(4) Configure the settings for acquiring job logs from the
device(s). ⇒ P. 192
(5) Configure the settings so that job logs are summarized for
each user and for each user group. ⇒ P. 200
The client software is not used.