Precision Digital PD6310 - Manual (Page 76)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
76
MeterView
®
Pro Software
The controller can be programmed and operated using the PC-based
MeterView Pro software available for free download at www.predig.com.
Batches may be started, paused, and stopped, through the monitoring
window of the MeterView Pro software. Preset and preclose values may
be changed, and the total and grand total reset.
Data logging for one controller at the time is available with MeterView
Pro software. More advanced data acquisition may be accomplished by
using any Modbus RTU compliant software.
In order to operate or program the batch controller using a computer, the
controller must be connected using a USB, RS-232, or RS-485 serial
adapter, see Accessories on page 8 for details.
Maximum/Minimum Readings
The max & min readings (peak & valley) reached by the process can be
displayed either continuously or momentary:
1. Display briefly by assigning to the digital inputs in the User menu.
2. Display continuously by assigning either display to max/min through
the Display menu.
!
Changing the programming of the F1-F3 function keys will
disable the default batch operation of these keys, and is
not recommended for batch control applications.
Any of the digital inputs can be programmed to reset the max & min
readings.
To display max/min readings continuously:
Assign either display to Max (d Hi), Min (d Lo), or toggle between Max
and Min (d HL) every 10 seconds.
!
Note that changing default the programming of the upper
or lower displays will interfere with seeing the batch total
(upper display) or rate (lower display) of the batch
process.