Precision Digital PD6400 - Manual (Page 38)

Model PD6400 High Voltage & Current Meter Instruction Manual
38
Multi-Point Linearization (Linear)
The process inputs may be calibrated or scaled to any display value
within the range of the meter. The meter is set up at the factory for 2-
point linear calibration.
Up to 32 linearization points may be selected. See page 71 for details.
MeterView
®
Pro Software
The meter can also be programmed using the PC-based MeterView Pro
software available for free download at www.predig.com.
Data logging for one meter at the time is available with MeterView Pro
software. More advanced data acquisition may be accomplished by
using any Modbus RTU compliant software.
In order to program the meter using a computer, the meter must be
connected using a USB, RS-232, or RS-485 serial adapter, see
ORDERING INFORMATION on page 7 for details.
Scaling the Meter without a Signal Source
The process inputs (4-20 mA,
±10 VDC) can be scaled to display the
process variables in engineering units.
A signal source is not needed to scale the meter; simply program the
inputs and corresponding display values.