Precision Digital PD6400 - Manual (Page 83)

Model PD6400 High Voltage & Current Meter Instruction Manual
83
TROUBLESHOOTING
Due to the many features and functions of the meter, it’s possible that
the setup of the meter does not agree with what an operator expects to
see. If the meter is not working as expected, refer to the Diagnostics
menu and consult the recommendations described below.
Diagnostics Menu (diag)
The Diagnostics menu is located in the Advanced Features menu, to
access Diagnostics menu see Advanced Features Menu, page 65.
It provides an easy way to view the programmed parameter settings for
troubleshooting purposes. Press the Enter button to view the settings
and the Menu button to exit at any time.
For a description of the diagnostic messages, see Advanced Features
Menu & Display Messages, page 65.
Determining Software Version
To determine the software version of a meter:
1. Go to the Diagnostics menu (diAG) and press Enter button.
2. Press Up arrow button and scroll to Information menu (Info).
3. Press Enter to access the software number (SFT) and version
(UER) information. Write down the information as it is displayed.
Continue pressing Enter until all the information is displayed.
4. The meter returns to Run Mode after displaying all the settings.