Precision Digital PD6400 - Manual (Page 42)

Model PD6400 High Voltage & Current Meter Instruction Manual
42
Setting the Display Parameter & Intensity (dsplay)
The Upper display (Big) can be programmed to display:
1. Process value Ch-A
2. Process value Ch-V
3. Process value Ch-P
4. Toggle between Ch-A & Ch-V, Ch-A & Ch-P, Ch-V & Ch-P,
and Ch-A, Ch-V, & Ch-P
5. Relay set points
6. Max & min values for each channel
7. Toggle between Channel & units
8. Modbus input
The Lower display (Little) can be programmed to display:
1. Process value Ch-A
2. Process value Ch-V
3. Process value Ch-P
4. Toggle between Ch-A & Ch-V, Ch-A & Ch-P, Ch-V & Ch-P,
and Ch-A, Ch-V, & Ch-P
5. Relay set points
6. Max & min values for each channel
7. Toggle between Channel & units
8. Modbus input
9. Off (no display)
10. Engineering units or custom legends
Display Intensity: The meter has eight display intensity levels to give
the best performance under various lighting conditions. Select intensity
8 for outdoor applications. The default intensity setting is 8.