Roland P-20HD Video Instant Replayer - Manual (Page 12)

12
Video Input/Output Settings
List of Compatible Video Formats
The P-20HD supports input and output of signals in the following
formats, regardless of the format in which the video was recorded.
Input formats
Frame rate
When set to “59.94 Hz” When set to “50 Hz”
720/59.94p 720/50p
1080/59.94i 1080/50i
1080/59.94p 1080/50p
SVGA (800 x 600/60 Hz) SVGA (800 x 600/60 Hz)
XGA (1024 x 768/60 Hz) XGA (1024 x 768/60 Hz)
WXGA (1280 x 800/60 Hz) WXGA (1280 x 800/60 Hz)
FWXGA (1366 x 768/60 Hz) FWXGA (1366 x 768/60 Hz)
SXGA (1280 x 1024/60 Hz) SXGA (1280 x 1024/60 Hz)
SXGA+ (1400 x 1050/60 Hz) SXGA+ (1400 x 1050/60 Hz)
UXGA (1600 x 1200/60 Hz) UXGA (1600 x 1200/60 Hz)
Full HD (1920 x 1080/60 Hz) Full HD (1920 x 1080/60 Hz)
WUXGA (1920 x 1200/60 Hz) WUXGA (1920 x 1200/60 Hz)
Audio input format HDMI: Linear PCM, 24 bits, 48 kHz, 2 ch
Output formats
Frame rate
When set to “59.94 Hz” When set to “50 Hz”
1080/59.94p 1080/50p
1080/59.94i 1080/50i
720/59.94p 720/50p
Audio output format HDMI: Linear PCM, 24 bits, 48 kHz, 2 ch
Setting the System Frame Rate
On the P-20HD, the input/output format is determined according
to the system frame rate. Set the system frame rate to match the
connected equipment.
1 . Press the [MENU] button Ó “System” Ó select
“Frame Rate,” and press the [VALUE] knob.
2 . Select “59.94 Hz” or “50 Hz,” and press the [VALUE]
knob.
3 . Press the [MENU] button to close the menu.
Internal processing
The internal processing on the P-20HD is progressive. Interlaced
input video is automatically converted to a progressive signal.
The video might appear jagged at that time, or the video in a PinP
inset screen or on the multi-view monitor might blur.
This is due to progressive conversion, and is not a malfunction.