Roland P-20HD Video Instant Replayer - Manual (Page 60)

60
Menu List
Main Bus
Menu item Value
(Bold: default)
Explanation
Level -INF, -80.0– 0.0 –10.0dB Adjusts the output volume.
Mute Off , On
Turns the mute function on/off. If this is set to “On,” the output audio is temporarily
muted.
Delay 0.0 –95.0ms (0.0–5.6/4.7Frame)
Adjusts the delay time of the audio.
* The range for the frame rate setting differs depending on the Frame Rate setting (59.97Hz/50Hz).
Effect Delays the output of the effect audio.
Limiter Off , On
Turns the limiter on/off.
Effect Limits the output volume so that it does not exceed the specified effect
threshold level.
Threshold -40– -6 –0dB
Specifies the base level at which the limiter is applied. Compression is applied to audio
that exceeds the threshold.
The volume level of audio that is output is limited so as to stay to below the threshold.
EQ Off , On
Turns the equalizer on/off.
Effect Adjusts the volume for each frequency band.
Hi Gain -15.0– 0.0 –15.0dB Boosts or attenuates the high band.
Hi Freq 1.0kHz– 10.0kHz –20.0kHz Adjusts the center frequency when changing the volume in the high band.
Mid Gain -15.0– 0.0 –15.0dB Boosts or attenuates the midrange band.
Mid Freq 20Hz– 500Hz –20.0kHz Adjusts the center frequency when changing the volume in the midrange band.
Mid Q 0.5– 1.0 –16.0 Adjusts the frequency bandwidth when boosting or attenuating the midrange band.
Lo Gain -15.0– 0.0 –15.0dB Boosts or attenuates the low band.
Lo Freq 20Hz– 100Hz –2.0kHz Adjusts the center frequency when changing the volume in the low band.
Preview Bus
Menu item Value
(Bold: default)
Explanation
Level -INF, -80.0– 0.0 –10.0dB Adjusts the output volume.
Mute Off , On Turns the mute function on/off. If this is set to “On,” the output audio is temporarily muted.
Delay 0.0 –95.0ms (0.0–5.6/4.7Frame)
Adjusts the delay time of the audio.
* The range for the frame rate setting differs depending on the Frame Rate setting (59.97Hz/50Hz).
Effect Delays the output of the effect audio.
Limiter Off , On
Turns the limiter on/off.
Effect Limits the output volume so that it does not exceed the specified effect
threshold level.
Threshold -40.0– -6.0 –0.0dB
Specifies the base level at which the limiter is applied. Compression is applied to audio
that exceeds the threshold.
The volume level of audio that is output is limited so as to stay to below the threshold.