Roland P-20HD Video Instant Replayer - Manual (Page 39)

39
Other Functions
Saving this Unit’s Settings to a SD Card/USB Storage
You can group together the unit’s settings into a single file (with a “.p20” extension) and save this to an SD card or USB storage.
The saved file can be loaded into this unit from the SD card or USB storage when necessary.
* Depending on the USB storage used, it may take a while for the unit to recognize the media.
Saving the file
When overwriting an existing file:
1 . Press the [MENU] button Ó “SD Card/USB Memory”
Ó select “Save Settings,” and press the [VALUE] knob.
The Save Settings screen appears.
2 . Select either “Save to SD Card” or “Save to USB
Memory,” and press the [VALUE] knob.
The backup file list appears.
3 . Select the file to overwrite, and press the [VALUE]
knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 . Select “OK” and press the [VALUE] knob.
This saves the file to the SD card or USB storage, and the unit
returns to the main screen.
When saving a new file or saving with a different
filename:
1 . Press the [MENU] button Ó “SD Card/USB Memory”
Ó select “Save Settings As,” and press the [VALUE]
knob.
The Save Settings as screen appears.
2 . Select either “Save to SD Card” or “Save to USB
Memory,” and press the [VALUE] knob.
The Save to SD Card or Save to USB Memory screen appears.
3 . Select “File Name,” and press the [VALUE] knob.
4 . Enter the file name.
* You can input a maximum of 20 characters (excluding the
extension).
1 . Use the [VALUE] knob to move the cursor, and press the
[VALUE] knob.
The cursor blinks.
2 . Use the [VALUE] knob to edit the character, and press the
[VALUE] knob.
¹ Hold down the [MENU] button and press the [VALUE] knob to
insert a character at the cursor position.
¹ Press the [EXIT] button to delete the character at the cursor
position.
3 . When you finish entering the name, use the [VALUE] knob to
select “OK,” and press the [VALUE] knob.
5 . Select “Save,” and press the [VALUE] knob.
A confirmation message appears.
* If there is already a file with the same name, an overwrite
confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 . Select “OK” and press the [VALUE] knob.
This saves the file to the SD card or USB storage, and the unit
returns to the main screen.