Roland P-20HD Video Instant Replayer - Manual (Page 37)

37
Annotation
Getting Ready to Use Annotation
Enabling annotation
1 . From the [MENU] button Ó select “Annotation” Ó
“Switch” and press the [VALUE] knob.
2 . Select “On,” and press the [VALUE] knob.
While annotation is enabled, the output video from the P-20HD
along with the buttons for controlling the animation are shown
on the external display or pen display connected to the PREVIEW
connector.
* The following screen is shown in this unit’s display if a pen tablet
is not connected.
3 . Press the [MENU] button to close the menu.
To disable annotation, set “Switch” to “Off.” When the confirmation
message appears, select “OK” and press the [VALUE] knob.
Displaying the cursor
You can make the pen cursor display in the PREVIEW screen.
1 . From the [MENU] button Ó select “Annotation” Ó
“Cursor Display” and press the [VALUE] knob.
2 . Set whether the cursor is shown or hidden, and
press the [VALUE] knob.
Menu Explanation
Off
The cursor is not shown in the annotation screen
that is output to the PREVIEW connector.
On
The cursor is shown in the annotation screen that
is output to the PREVIEW connector.
Auto
The cursor is shown or hides depending on the
type of pen tablet that’s connected.
Pen display: cursor is hidden
Pen tablet: cursor is shown
3 . Press the [MENU] button to close the menu.
Calibration
You can calibrate the drawing position if the position of the pen/
cursor is out of alignment with the actual image that is drawn.
NOTE
There is no need to calibrate if you’re using a tablet without an LCD
screen.
1 . From the [MENU] button Ó select “Annotation” Ó
“Calibration” and press the [VALUE] knob.
A calibration screen is shown on the PREVIEW screen (pen display).
A confirmation message is shown on this unit’s display.
2 . Click the cross-shaped cursor on the four corners of
the screen in order with the pen.
Each cross-shaped cursor changes from white to red when clicked.
Once all the cross-shaped cursors in all four corners have turned
red, the calibration is finished.
The display automatically returns to the menu after calibration.
* To cancel calibration, press the [EXIT] button on the P-20HD.