Roland P-20HD Video Instant Replayer - Manual (Page 13)

13
Video Input/Output Settings
Specifying the Input Format (EDID)
With the factory settings, the EDID data is “Internal” (set so that EDID
data for all formats that can be inputted is sent). Edit this setting if
you want the EDID data for a specific input format to be sent to the
source device.
What is EDID?
EDID is data that is transmitted from the P-20HD to the source
device when the P-20HD is connected to a source device. EDID
contains data such as the formats that can be input to the P-20HD
(resolution, color space, color depth) and audio information.
Based on the EDID data that the source device receives, it outputs
the most appropriate video format to the P-20HD.
1 . Press the [MENU] button Ó “Video Input” Ó select
“LIVE IN 1”
(INPUT 1 connector)
or “LIVE IN 2”
(INPUT 2
connector)
, and press the [VALUE] knob.
2 . Select “EDID,” and press the [VALUE] knob.
3 . Select the input format (EDID), and press the
[VALUE] knob.
This switches the input format (EDID).
4 . Press the [MENU] button to close the menu.
Setting the Output Format
Here’s how to specify the output format as appropriate for the device
that’s connected.
NOTE
If the display does not support the output format of the P-20HD, the
video may not play properly.
1 . Press the [MENU] button Ó “Video Output” Ó select
“MAIN OUTPUT,” and press the [VALUE] knob.
2 . Select “Output Format” with the [VALUE] knob.
3 . Use the [VALUE] knob to select the output format,
and press the [VALUE] knob.
The output format switches.
4 . Press the [MENU] button to close the menu.
MEMO
About the output format for the OUTPUT PREVIEW connector
¹ When the annotation feature (p. 36) is off, this is fixed at 1080p.
¹ When annotation is on, the following formats are used, according
to the settings of the OUTPUT MAIN connector format setting.
OUTPUT MAIN connector OUTPUT PREVIEW connector
1080p 1080p
1080i 1080p
720p 720p
* In either case, the frame rate is determined by the system frame
rate settings (p. 12).