Roland P-20HD Video Instant Replayer - Manual (Page 63)

63
Menu List
14: RS-232
Menu item Value (Bold: default) Explanation
Baudrate 9600 , 38400bps Specifies the communication speed (bps) of the RS-232 connector.
Remote Control
This sets how the remote control is used.
Off Disables remote control.
PC Remotely controls the P-20HD from a controlling device such as your computer.
Switcher
Synchronizes playback of the clip or playlist on the P-20HD with the video transition on
your Roland video switcher.
Target Model (*5) V-60HD Sets the video switcher used to synchronize with the P-20HD.
Input Channel (*5) Ch5, Ch6 Select the channel of the video switcher to which the P-20HD video is input.
Host/Remote (*5) Host , Remote
Sets whether the P-20HD acts as the host (operating other devices) or the remote (being
operated by other devices).
Time Offset at Play
Start (*6) (*7)
0– 40– 200ms
Adjusts how long it takes before the video transition starts on the other video switcher
after the clip or playlist starts playing back on the P-20HD.
Time Offset at Play
End (*6) (*7)
-200– -40– 0ms
Adjust the time it takes before the video transition starts, so that the video transition
finishes on the other video switcher when the clip or playlist stops playing back on the
P-20HD.
(*6) This can be set if Remote Control is “Switcher.”
(*7) This can be set if Host/Remote is “Host.”
15: LAN
Menu item Value (Bold: default) Explanation
IP Setting
Selects how settings are made for the IP address, subnet mask, and default gateway.
Off Disables the network connection.
Using DHCP
The IP address and other information needed for connecting to the network is obtained
automatically from the DHCP server of the LAN.
Manually This is to be configured manually.
IP Address (*8) ---.---.---.--- Specifies the IP address as appropriate for the network to which the unit is connected.
Subnet Mask (*8) ---.---.---.--- Specifies the subnet mask as appropriate for the network to which the unit is connected.
Gateway (*8) ---.---.---.---
Specifies the default gateway as appropriate for the network to which the unit is
connected.
MAC Address 00:00:00:00:00:00 (example display) Displays the MAC address.
User Account This configures the necessary user account to connect to the network.
User ID – Sets the user ID (4–8 characters).
Password –
Sets the password (8–12 characters).
* When you set a different password, there is no need to input the old password or
perform a reset operation.
* If a password has been set, “************” is displayed.
Reset [Exec] Resets the user ID and password.
Remote Control Off , On
When this is set to “On,” the unit receives remote control commands from the network
device.
FTP Off , On
When this is set to “On”, you can access the “/P-20HD_Export” folder that’s located on the
SD card or USB storage device connected to the P-20HD, via FTP from your computer.
You can work with the following files from your FTP client.
¹ Downloading/uploading an exported project archive
¹ Downloading an exported video, EDL or FCPXML file
Directory (*9) SD Card , USB Memory
Sets the media (SD card or USB storage) to access from your computer when connecting
via FTP. The contents of the “/P-20HD_Export” folder on the respective storage media are
shared.
Status Offline, Online Displays the FTP connection status.
(*8) This can be set if IP setting is “Manually.”
(*9) This can be set if FTP is “Off.”