Sony ZV-1F Vlogging Camera (Black) - Manual (Page 111)

111
Modem
Modem settings
Note
• This item is
displayed when
the NETWORK
upgrade license
(option) is
installed.
Setting
On / Off
Turns the modem connection on/off.
Modem1 Device Name Displays the device name of modem 1.
Modem1 IP Address Displays the IP address of modem 1.
Modem1 Subnet Mask Displays the subnet mask of modem 1.
Modem2 Device Name Displays the device name of modem 2.
Modem2 IP Address Displays the IP address of modem 2.
Modem2 Subnet Mask Displays the subnet mask of modem 2.
Network Client
Mode
Network client
mode settings
Note
• This item is
displayed when
the NETWORK
upgrade license
(option) is
installed.
Setting
On / Off
Starts (On) or stops (Off) network client mode.
NCM Settings Select Selects preset settings (NCM Settings1/NCM Settings2/NCM
Settings3) comprising network client mode connection
settings configured beforehand.
NCM Settings1
Display Name Sets the display name shown in the NCM Settings menu.
CCM Address Sets the address of the destination CCM or XDCAM air to
connect. Host name or IP address
CCM Port (1 to 65535 ( 8443 )) Sets the port number of the destination CCM or XDCAM air
to connect.
User Name Sets the user name for authentication of the CCM connection.
Password Sets the authentication password of the CCM connection.
CCM Certificate
Load / Clear / None
Loads a certificate when connecting to CCM or XDCAM air,
and clears settings.
CCM Certificate Status
Loaded / Default
Displays the certificate loading status when connecting to
CCM or XDCAM air.
Camera Control
Enable / Disable
Enables/disables camera control from a CCM, when a CCM is
connected, or from XDCAM air.
Camera Setting
Always / Onetime / Off
Enables/disables All File operations from a CCM, when a
CCM is connected, or from XDCAM air.
Always: Enable All File operations from a CCM or XDCAM
air all the time.
Onetime: Enable All File operations (Load) from a CCM or
XDCAM air one time only.
Off: Disable All File operations from a CCM or XDCAM air.
Reset
Execute / Cancel
Resets the settings of NCM Settings to the defaults.
Execute: Execute function.
NCM Settings2 Same as NCM Settings1.
NCM Settings3 Same as NCM Settings1.
Network
Item Sub-items and Settings Description