Sony ZV-1F Vlogging Camera (Black) - Manual (Page 97)

97
Audio Input
Audio input
settings
CH2 Wind Filter
On / Off
Turns the wind noise reduction filter for recording on channel
2 on/off.
CH3 Wind Filter
On / Off
Turns the wind noise reduction filter for recording on channel
3 on/off.
CH4 Wind Filter
On / Off
Turns the wind noise reduction filter for recording on channel
4 on/off.
CH3 Level Control
Auto / Manual
Selects auto/manual adjustment of the input level for
recording on channel 3.
CH4 Level Control
Auto / Manual
Selects auto/manual adjustment of the input level for
recording on channel 4.
CH3 Input Level
0 to 99 ( 49 )
Sets the input level for recording on channel 3 when manual
adjustment is selected.
CH4 Input Level
0 to 99 ( 49 )
Sets the input level for recording on channel 4 when manual
adjustment is selected.
Limiter Mode
Off / –6dB / –9dB / –12dB /
–15dB / –17dB
Selects the limiter characteristic (saturation level) for large
signals when adjusting the audio input level manually.
CH1&2 AGC Mode
Mono / Stereo
Selects the auto level adjustment mode for recording on
channel 1 and channel 2. When Stereo is selected, AGC is
linked between channels.
CH3&4 AGC Mode
Mono / Stereo
Selects the auto level adjustment mode for recording on
channel 3 and channel 4. When Stereo is selected, AGC is
linked between channels.
AGC Spec
–6dB / –9dB / –12dB /
–15dB / –17dB
Selects the AGC characteristic (saturation level) for large
signals when adjusting the audio input level automatically.
1kHz Tone on Color Bars
On / Off
Turns the 1 kHz reference tone signal on/off when displaying
color bars.
Audio Output
Audio output
settings
Monitor CH
CH1/CH2 / CH3/CH4 / MIX
ALL / CH1/ CH2 / CH3 / CH4
Selects the audio channel output to the headphone jack and
built-in speaker.
Headphone Out
Mono / Stereo
Sets the headphones output to monaural (Mono) or stereo
(Stereo).
Alarm Level
0 to 7 ( 4 )
Sets the alarm volume.
HDMI Output CH
CH1/CH2 / CH3/CH4
Selects the combination of audio channels on the HDMI
output.
Analog Output CH
CH1/CH2 / CH3/CH4
Selects the combination of audio channels on the analog audio
output.
Audio
Item Sub-items and Settings Description