Sony ZV-1F Vlogging Camera (Black) - Manual (Page 75)

75
You can protect a specified clip or all clips to
protect the clips from being deleted.
is added to the thumbnails of protected clips.
Clips can be protected on the thumbnail screen.
Protecting a specific clip
1
Select Lock/Unlock Clip >Select Clip
>Execute in the Thumbnail menu.
The clip selection screen appears.
2
Select the clip to protect.
A check mark is attached to the selected clip.
3
Press the MENU button.
A confirmation screen appears.
4
Select Execute.
The clip is protected, and a completion
message appears.
5
Press the SET button or SEL/SET dial
to dismiss the message.
Protecting all clips
1
Select Lock/Unlock Clip >Lock All
Clips in the Thumbnail menu.
A confirmation screen appears.
2
Select Execute.
All clips are protected, and a completion
message appears.
3
Press the SET button or SEL/SET dial
to dismiss the message.
Unlocking all clips
1
Select Lock/Unlock Clip >Unlock All
Clips in the Thumbnail menu.
A confirmation screen appears.
2
Select Execute.
All clips are unlocked, and a completion
message appears.
3
Press the SET button or SEL/SET dial
to dismiss the message.
You can copy clips to another memory card.
Clips are copied to destination memory cards
using the same names as the original clips.
Notes
• If a clip with the same name already exists at the copy
destination memory card, a number in parentheses is
added to the original name.
• The number in parentheses is the smallest number that
does not exist at the copy destination.
Examples: ABCD0002 t ABCD0002(1)
ABCD0002(1) t ABCD0002(2)
ABCD0005(3) t ABCD0005(4)
• If the parenthetical numbers (1) to (999) already exist
at the copy destination, because a clip has been copied
more than 1000 times, it is not possible to copy any
more clips under that name.
• A message appears if there is not enough free space on
the copy destination memory card. Exchange the card
for one with more free space.
• To copy a memory card with multiple recorded clips,
it may not be possible to copy all clips even when the
memory cards have the same capacity, depending on
the memory characteristics and usage of the memory
cards.
Copying a specific clip
1
Select Copy Clip >Select Clip >Execute
in the Thumbnail menu.
The clip selection screen appears.
2
Select the clip to copy.
A check mark is attached to the selected clip.
3
Press the MENU button.
A confirmation screen appears.
4
Select Execute.
The clip is copied, and a completion message
appears.
5
Press the SET button or SEL/SET dial
to dismiss the message.
Copying all clips
You can copy all clips stored on the same
memory card at the same time to another memory
card.
Protecting clips (exFAT)
Copying clips