Epson 7850p - Manual (Page 112)

112 Presenting from a Memory Card or Digital Camera
The autorun setting means that the scenario will start playing
whenever the projector is turned on (with the memory card in the
projector).
5. Do one of the following:
■ If you don’t want the scenario to run automatically, click
Cancel . Skip to step 9 to remove the card and insert it in the
projector.
■ If you want it to run automatically, click OK and continue
with the following instructions.
You see the Edit Autorun window:
6. To set a scenario to run automatically, select it from the list on the
left side of the screen and use the arrow button to move it to
the list on the right.
7. Click the Revive box if you want your scenario to repeat
continuously. Clear the checkbox if you want it to play only once.
8. When done, click OK .
9. Remove the card from your computer. See your computer’s
documentation if you need instructions on removing the card. If
you’re using Windows 2000 or Me, you may first need to click an
icon to stop or disconnect the card
.
Scenario set
to run
automatically Scenarios on
the card
note
If more than one scenario is
set to run automatically,
they will play in the order
listed on this screen.