Epson 7850p - Manual (Page 145)

Managing Projectors 145
Registering a Projector
Before you can monitor a projector, you have to register it. Follow
these steps:
1. Click Start > Programs or All Programs > EPSON Projector
> EMP Monitor . You see this screen:
2. Click Register projector as shown.
You see this screen:
3. Click Auto detect to locate projectors currently operating on the
network. Or click Manual registration and enter the projector’s
name and network address.
Click here
Click here
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 142 to
configure your projector for
a wired network, or Chapter
4 to configure the projector
for a wireless network.