Epson 7850p - Manual (Page 60)

60 Connecting to Computers, Cameras, and Other Equipment
Connecting an S-Video Source
1. Locate an S-video cable (one is usually provided with your video
equipment, or you can purchase one from EPSON; see page 13).
2. Connect the cable between the S-video connector on your player
and the S-Video connector on the projector:
3. If you want to play sound through the projector, see page 65 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 1
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image. Once the projector is turned
on, select the image source: press the
S-Video button on the
remote control, or press the Video/BNC button on the projector’s
control panel repeatedly until S-Video is displayed on the
projected image.