Epson 7850p - Manual (Page 128)

128 Using the Projector’s Menus
■ Sync
Adjust this value if the image appears blurry or flickers.
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas. Select
Auto to let the projector adjust the contrast automatically, or
select Manual to adjust the setting yourself. (Press Enter after
you make the selection.)
■ Sharpness
Adjusts the sharpness of the image.
■ Resolution
If your image is distorted (compressed, stretched, partially cut
off, or doesn’t completely fill the display area), the projector’s
resolution setting may not match that of your computer.
Select
Auto to let the projector adjust the resolution
automatically, or Manual to adjust the setting yourself. (Press
Enter after you make the selection.)
■ Preset
Once you’ve fine-tuned the settings in the Video menu for
the computer you’re using, you can save them as a group
using one of the ten
Preset settings. The next time you use
the same computer, simply press the Preset button on the
remote control to recall your saved settings. (Press the Preset
button repeatedly to select the number corresponding to the
setting you want to use.)