Epson 7850p - Manual (Page 189)

Solving Problems 189
In EMP SlideMaker, your PowerPoint files don’t display
thumbnails and can’t be pasted into scenarios.
If you use PowerPoint 97, make sure the MS Office JPEG converter
has been installed. Run the Office 97 installer, display the
Converts
and Filters option, and install the JPEG filter. Also, make sure
PowerPoint is installed on the computer you’re using to build the
scenario.
You can’t edit scenario files in EMP SlideMaker after they
have been transferred to the memory card.
When scenario files are transferred, they are converted to the .SIT
format. You can only edit scenarios before they are transferred (in the
.SIC format). Open the scenario files saved on your hard drive, make
any desired changes, then transfer the scenario again to your memory
card.
You can’t transfer your slideshow to the memory card
because you aren’t able to see the card’s drive letter.
You must insert the memory card in your computer’s PCMCIA slot
before you select
Send Scenario from the Scenario Option(s) menu.
If you don’t, you won’t be able to see the card’s drive in the drive
selection window. If this happens, close and restart EMP SlideMaker.
Make sure your card is inserted before you select
Send Scenario .
You can’t play your movies on the projector.
The projector only supports MPEG2 files. It does not support
MPEG1 files.
EasyMP is unable to see the image files on your camera.
Make sure your camera shows up on your desktop as a drive letter
when you connect it to your computer. If it does, it is probably a USB
mounted device and will work with your projector. The projector does
not support TWAIN-compliant digital cameras.