Epson 7850p - Manual (Page 155)

Managing Projectors 155
12. When done making your settings, highlight the OK button at the
top of the screen (you can either use the button on the remote
control or press ESC to highlight it), then press Enter . Highlight
the OK button again and press Enter to return to the main
EasyMP Network Screen.
For help understanding e-mail alerts, see page 155.
Understanding the Notification
Messages
If a projector experiences a problem, it sends an e-mail message to
each of the addresses you provided using EMP NetworkManager. The
message includes the heading “EPSON Projector” in the subject line.
The body of the message contains:
■ the name of the projector
■ the projector’s IP address
■ a description of the problem
The problem descriptions are similar to the errors reported by EMP
Monitor listed on page 149.
If a plus (+) sign appears before the description, it indicates that a
problem has occurred. A minus (–) sign appears when the problem
goes away or is resolved.
note
If a projector develops a
critical problem, it may not
be possible for it to report the
error.