Epson 7850p - Manual (Page 63)

Connecting to Computers, Cameras, and Other Equipment 63
Connecting Using a BNC-style Cable
1. Locate a BNC-style video cable (one may be included with your
video equipment).
2. Connect the cable between your player and the corresponding
R/G/B connectors on the projector.
3. If you want to play sound through the projector, see page 65 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 1
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image. Once the projector is turned
on, be sure to:
■ Enter the projector’s Setting menu, then change the BNC
Input setting to
RGB-Video (see page 137).
■ After exiting the menu system, press the BNC button on the
remote control or press the Video/BNC button on the
projector repeatedly to select the correct image source
(
BNC (RGB-Video) should appear on the screen).
note
Be sure your video player is
not a component video
source. If you set the wrong
source, image quality may
suffer. Check your video
player’s documentation.