Epson 7850p - Manual (Page 83)

Presenting Through a Wireless Network 83
4. Click the Advanced tab. You see a screen like this:
5. Check your wireless card or adapter’s device settings. (Depending
on the type of card or adapter you’re using, some of the settings
may be different than those listed here.)
■ Set the network type to Infrastructure .
■ Set the SSID to match the name assigned to the access point
(which should also be the projector’s ESSID)—for example,
CONF ROOM .
■ Make sure encryption is Disabled .
6. Click the General tab and make sure that your wireless card or
adapter is enabled.
7. When done making the settings, click OK to close the wireless
properties dialog box.