Epson 7850p - Manual (Page 132)

132 Using the Projector’s Menus
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the
projector, and then use it as your startup screen. You can also use it as
the screen to be displayed when the projector is not receiving a signal
or when you press the
A/V Mute button. The image can be a
company logo, slogan, photograph, or any other image you want to
use.
Capturing the Image
Start by displaying the image you want to use. It can be an image from
either a computer or video source such as a DVD player or digital
camera. Then follow these steps to capture the image and transfer it to
the projector:
1. Press the Menu button on the remote control, highlight the
User’s Logo menu, and press Enter .
2. When you see a message asking whether you accept the present
image as the user’s logo, select Yes and press Enter .
3. A selection box displays over the image. Use the pointer
button to select the area of the image you want to use. Then press
Enter .
Execute Execute
Video Video
Audio Audio
Effect
Effect
User's Logo User's Logo
Advanced1 Advanced1
About About
Reset All
Reset All
[ ]: Execute [ ]: Execute [Menu]: Exit [Menu]: Exit [ ]: Select [ ]: Select
Setting Setting
Advanced2 Advanced2