Epson 7850p - Manual (Page 25)

Displaying and Adjusting the Image 25
Adjusting the Height of Your Image
If the image is too low on the screen, you can use the front adjustable
foot to raise it.
1. Stand behind the projector. Press the blue foot release lever up
and lift the front of the projector.
2. Once the image is positioned where you want it, release the lever
to lock the foot in position.
3. If necessary, you can fine-tune the height or level the image by
turning the projector’s rear feet.
Raising the projector causes the image to distort or “keystone,” but
you can manually correct the shape as described in the next section.
Projector rear foot