Epson 7850p - Manual (Page 73)

Presenting Through a Wireless Network 73
8. When done making these settings, highlight the OK button at the
top of the screen (you can either press the ESC button on the
remote control or use the button to highlight it), then press
Enter . Highlight the OK button again and press Enter to return
to the main EasyMP Network Screen.
Now you’re ready to set up your computer for wireless projecting. Go
to “Configuring the Network Settings for Windows” below, or
“Setting Up Your Macintosh for Ad Hoc Mode” on page 75.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your laptop’s or PC’s network card match the settings you entered
for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click Start > Control Panel > Network
and Internet Connections . Then click the Network
Connections icon.
You see a screen similar to this:
2. Right-click the Wireless Network Connection icon and select
Properties .
note
On some Windows systems,
you can right-click
My Network Places or
Network Neighborhood
on the desktop and select
Properties .
Right-click and select Properties